In less than three years, the ENA series has become the new standard for performance RF network analysis. Equiped with the core functions of the industry-standard ENA, the ENA-L (E5061A, E5062A, 300 kHz to 1.5 or 3 GHz) is the latest and most advanced low-cost solution for basic RF network analysis. So after over 10 years of service the 8712 and 8714 series will be discontinued. The last day to place orders for 8712/14 models is June 30, 2004. The Agilent 8712ET features a built-in transmission/reflection test set with a full range of magnitude and phase measurements. Two independent channels can measure and display two device parameters, such as transmission and reflection response, in a variety of formats including complex impedance, SWR, and delay, on rectangular, polar or Smith-chart displays. These analyzers also employ vector-error-correction techniques to enhance measurement accuracy. For a wider range of output power levels to test active devices and components, Option 1E1 adds a 60-dB step attenuator as a standard feature, which extends the lowest power-level setting to -60 dBm. Both 50-ohm and 75-ohm versions are available. New! View the ENA Series of RF Network Analyzers product overview and application examples online: ENA Series RF Network Analyzer Video Demos .Narrowband and broadband detection .100 dB dynamic range .Real-time sweep speeds (40 ms/sweep) .Integrated T/R test set .Synthesized source with 1-Hz resolution .Standard LAN interface .Standard Internal Agilent Instrument BASIC (IBASIC) .Standard 2, 6, and 12-port switching test sets available .Optional fault-location and SRL measurements Key Specifications Narrowband and broadband detection .100 dB dynamic range .Real-time sweep speeds (40 ms/sweep) .Integrated T/R test set .Synthesized source with 1-Hz resolution .Standard LAN interface .Standard Internal Agilent Instrument BASIC (IBASIC) .Standard 2, 6, and 12-port switching test sets available.